Pipe Hose
Clamp Kit 3 Meter Pipe Clamp Kit 8 tension clamps Steel Clips any Size
Product information
3 Meter Hose Clamps to Make
any size
8 Tensions Clamps
Make Hose Clamps to Your Required
Length
8mm Metal Band Hose 3m Kit
with 8 Tension Clamps
BG 10mm 1 gang Single or 2 gang Double Spacer
Frame in White
Product information
BG 817 - 1 Gang 10mm Square Spacer
BG 818 - 2 Gang 10mm Rectangular Spacer
PRO Small Pliers Beading Jewellery Hobby Tools
Set Combi Round Nose Side Cutter
This offer is for one Plier/Cutter. Product information
The
mini pro combination plier is made from drop forged, heat treated steel
for durability
· The mini side cutting pro plier is made from
strong drop forged steel for durability
· The spring loaded mini needle nose plier is
made from strong, drop forged steel.
COMFORTABLE
AND EASY TO USE: Spring loaded and with two-tone cushion grips, it is
comfortable and easy to use
VERSATILE:
Ideal for a wide range of hobby and precision work
Choose from one or more of the following -
Round Nose Pliers
Side / Diagonal Cutters
Combination Pliers
Or opt for all of the above in a set.
Figure of 8 Mains Cable / Power
UK Lead Plug Cord C7 Fig 8 IEC C7 Power Cord
Product information
Available
Cable Lengths 0.5m / 1m / 2m / 3m / 5m
Connector
A: 3-Contact AC Male-UK
Connector
B: IEC (C7) Connector
Electrically
Safe, EU Standard Insulation
This
listing is for a IEC (C7) to UK Plug power cable only for PC, Monitors, Document
Printers etc. as described in the title. This cable has a 3-Contact AC Male-UK
mains plug and it can be used in countries which use British type G mains plug.
High Quality Brush Faceplate Cable Exit and Entry
Wall Cover
High Quality Faceplate with Metal Strips on the Rear.
Product Information
Choose from Single or Double Size in Black or White
Keep your cables neatly
organised and hidden, reducing clutter in your home or office
Dimensions of Single Brush
Plate- 86mm x 86mm and a 50mm x 50mm Large Brush Aperture
Dimensions of Double Brush
Plate- 146mm x 86mm and a 50mm x 100mm Large Brush Aperture
Compatible with UK back boxes
Fixing Screws and Screw Caps
included
This
offer is for a double light switch decorative gold finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 175mm x 115mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate, the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
Heavy Duty
Adjustable Spanners, Black
· Versatile Choice of
6", 8" and 10” Heavy Duty Adjustable Wrenches
· Manufactured from drop forged steel
· Corrosion resistant
· Fast adjustable action, 20mm, 25mm and 30mm openings accordingly with
markings showing measurement
Three way lead connector, designed to provide a simple method of extending mains connected tools and other appliances.
For use with earthed appliances
They are manufactured from high impact rubber
Rated at 10A and conforms to BS5733/A.
This
offer is for a single light switch decorative black finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
Product InformationYou will receive one tube of 60/40 wound solder wire which is 1.20mm thickness.A 10g tub of quality flux, also known as soldering paste. This has a wax-like consistency and is easy to apply.Not everyone will have soldering experience and if that is you, please read the five steps below.1. Clean the surfaces to be joined if necessary.2. Apply a small amount of flux to the area of soldering.3. Heat using the flame of the butane torch and place the two items together.4. Apply the solder to the heated brass while maintaining the heat until suddenly it runs.5. Quickly remove the heat.The tub will last you a long time because so little is used for each soldering job.Solder SpecificationLeaded rosin flux solder in a handy tube, small enough to fit in a pocket, the solder can be pulled through a hole in the top of the tube
High activity rosin flux
Low melting point for rework and repair
Length: 2.5m
Solder Alloy: 60, 40 Sn, Pb
External Diameter - Metric: 1.2mm
Melting Temperature: 190°C
Weight - Metric: 17g
LEADED SOLDER IS FOR PROFESSIONAL USE ONLY
Mains Plug Top With On/Off Neon Switch
13A plug top featuring an on/off switch
Allows appliances to be switched on and off without
the need for unplugging
Fitted with 13A replaceable fuse
Red neon indicator indicates power source
Voltage Rating : 250V AC
5pc HSS Steel Metal Wood Plastic Titanium Coated
DRILL BITS Set 1/4'' Hex Shank
Product information
DURABLE: These 6.25mm (1/4") shank high speed steel (HSS) drill
bits are heat treated and have a titanium nitride coating for excellent cutting
performance
VERSATILE: The set includes sizes: 1.5mm, 2.5mm, 3.2mm, 4mm and 4.8mm
and can be used with most popular power tools
4 Gang Extension Socket Multi Plug (No
cable) 4 Way 13a Mains Power Adaptor
Product Information
Convert 1
UK Mains to 4
Max load:
13A - 250V
Conforms
to BS1363/A
Dimensions
(HxWxD): Approximately 110x250x25mm
2 Packs of Dewalt DT20650 DCM561 Trimmer
Strimmer Line 15.2m x 2mm
Product InformationValue Deal
2 Packs of Dewalt 15.2metres X 2mm of Strimmer
Line in a Plastic Pull Out.
Universal for All Makes and Models of Electric Strimmers and
Lightweight Petrol Machines.
Rust resistant black finish
Rubber end caps
Ideal for hanging tools, ladders, cords and power equipment.
Max load: 30kg
Approx 19.5cm high and 27.5cm depth with inside bracket space 24cm.
Soldering Iron Replacement for Mini Soldering Station 12V 8W
Replacement tips available separately
Long Cable
3mm tip
Soldering tip temperature max 450°C at 12V DC
12V, 8W
Thermoplastic construction with pull handle in Black
Dimensions (WxHxD): 57x52x45mm
Ideal for arthritis sufferers and elderly or anyone who finds removing plugs hard
Carbon impregnated high density polyurethane foam ideal for pin insertion. It provides both ESD and mechanical protection by retaining devices securely by their pins.
Highly effective isopropyl alcohol (IPA) cleaning solvent for electrical and electronic components.
Evaporates after application and leaves no residue
Non-corrosive to metals, safe on plastics and fibres
Flammable
Applications
IPA is a universally recognised electronic cleaning solvent which is suitable for use on a wide variety of electronic equipment and
components including tape heads, disc drives, PCB's, optical equipment, lenses, mirrors and precision instruments.
It evaporates
after application and does not leave any residue.
It is considered to be safe on metals and most plastics, if unsure of plastic compatibility, always test on an inconspicuous area before
general use.
Note
It is flammable not for use on live electrical equipment. Allow solvent to fully evaporate before operating the equipment.
Please read label for more information.
