60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 1.2mm 100g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 1.2mm
Melting
Temperature: 190°C
Weight
- Metric: 100g
60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 0.7mm 250g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 0.7mm
Melting
Temperature: 190°C
Weight
- Metric: 250g
60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 0.7mm 50g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 0.7mm
Melting
Temperature: 190°C
Weight
- Metric: 50g
Multicore Loctite 60/40 Tin Lead No Clean Rosin Flux Solder Wire 0.7mm / 1.2mm 250g
Product Information
Multicore X39 cored wires are manufactured as standard with a nominal flux content of 1%. Multicore X39 cored wire is available in a variety of alloys conforming to J-STD-006 and EN 29453 or alloys conforming to similar national or international standards.
The alloys used for Multicore flux cored solder wire conforms to the purity requirements of the common national and international standards.
Multicore X39 solid flux is based on modified rosins and halide-free carboxylic acid activators. In use it has a mild rosin smell and leaves a small quantity of clear residue.
No clean
Low residue
Eliminates cost of cleaning
Halide free
Non-corrosive formulation
Negligible residues
Fast Soldering on copper and brass
Leaded
Flux Type: No Clean and Rosin Flux
Solder Alloy: 60, 40 Sn, Pb
External Diameter - Metric: 0.7mm / 1.2mm
Melting Temperature: 183°C
Weight - Metric: 250g
Applications
Maintenance & Repair, Industrial
100g Reel of Silverline Soldering Wire
Product information
Flux-covered Electrical
Solder 60:40 Tin/Lead for High Performance and Efficiency
Suitable for Electronic
& Electrical Applications
60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 1.2mm 250g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 1.2mm
Melting
Temperature: 190°C
Weight
- Metric: 250g
60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 1.2mm 50g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 1.2mm
Melting
Temperature: 190°C
Weight
- Metric: 50g
60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 0.7mm 100g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 0.7mm
Melting
Temperature: 190°C
Weight
- Metric: 100g
SOLDERING SET
FOR YOUR MAMOD STEAM ENGINE
REPAIR OR RENOVATION
Product Information
You will receive one tube of 60/40 wound solder wire which is
1.20mm thickness.
A 10g tub of quality flux, also known as soldering
paste.
This has a wax-like consistency and is
easy to apply.
Not everyone will have
soldering experience and if that is you, please read the five steps below.
1. Clean the surfaces to be joined if necessary.
2. Apply a small amount of flux to the area of
soldering.
3. Heat using the flame of the butane torch and
place the two items together.
4. Apply the solder to the heated brass while
maintaining the heat until suddenly it runs.
5. Quickly remove the heat.
Practice makes perfect!
The tub will last you a long
time because so little is used for each soldering job.
Solder specification –
Leaded rosin flux solder in a handy tube, small
enough to fit in a pocket, the solder can be pulled through a hole in the top
of the tube
High activity rosin flux
Low melting point for rework and repair
Length: 2.5m
Solder Alloy: 60, 40 Sn, Pb
External Diameter - Metric: 1.2mm
Melting Temperature: 190°C
Weight - Metric: 17g
LEADED SOLDER IS FOR PROFESSIONAL USE ONLY
250g or 100g Reel of Silverline Multi-core 1mm Soldering Wire Electronic Tin Lead 60/40
Product Information
Multi-core solder wire (60% tin, 40% lead).
Suitable for fast soldering on copper or brass surfaces and solder-coated materials.
Ideal for use on micro electronics, fine wires and most other electrical and electronic soldering operations.
External diameter 1mm.
60/40
Solder Wire Tube Tin Lead with Dispenser Electrical Soldering 17g
Product
Information
2 Qty 60/40 Solder Wire with Dispenser
Contains
Lead, for professional use only.
60 Tin / 40 Lead
External
Diameter - Metric: 0.9mm
Weight
- Metric: 17g x2
Multicore
Loctite 60/40 Tin Lead No Clean Rosin Flux Solder Wire 1.2mm 250g
Product
Information
Multicore
X39 cored wires are manufactured as standard with a nominal flux
content of 1%. Multicore X39 cored wire is
available in a variety of alloys conforming to J-STD-006 and EN 29453
or alloys conforming to similar national or international standards.
The alloys used for Multicore flux cored solder wire conforms to the
purity requirements of the common national and international
standards.
Multicore X39 solid flux is based on
modified rosins and halide-free carboxylic acid activators. In use it
has a mild rosin smell and leaves a small quantity of clear residue.
No
clean
Low
residue
Eliminates
cost of cleaning
Halide
free
Non-corrosive
formulation
Negligible
residues
Fast
Soldering on copper and brass
Leaded
Flux Type: No
Clean and Rosin Flux
Solder Alloy:
60, 40 Sn, Pb
External
Diameter - Metric: 1.2mm
Melting
Temperature: 183°C
Weight -
Metric: 250g
Applications
Maintenance
& Repair, Industrial
Multicore
Loctite 60/40 Tin Lead No Clean Rosin Flux Solder Wire 0.7mm 250g
Product
Information
Multicore
X39 cored wires are manufactured as standard with a nominal flux
content of 1%. Multicore X39 cored wire is
available in a variety of alloys conforming to J-STD-006 and EN 29453
or alloys conforming to similar national or international standards.
The alloys used for Multicore flux cored solder wire conforms to the
purity requirements of the common national and international
standards.
Multicore X39 solid flux is based on
modified rosins and halide-free carboxylic acid activators. In use it
has a mild rosin smell and leaves a small quantity of clear residue.
No
clean
Low
residue
Eliminates
cost of cleaning
Halide
free
Non-corrosive
formulation
Negligible
residues
Fast
Soldering on copper and brass
Leaded
Flux Type: No
Clean and Rosin Flux
Solder Alloy:
60, 40 Sn, Pb
External
Diameter - Metric: 0.7mm
Melting
Temperature: 183°C
Weight -
Metric: 250g
Applications
Maintenance
& Repair, Industrial
