Description
Product Information
You will receive one tube of 60/40 wound solder wire which is 1.20mm thickness.
A 10g tub of quality flux, also known as soldering paste.
This has a wax-like consistency and is easy to apply.
Not everyone will have soldering experience and if that is you, please read the five steps below.
1. Clean the surfaces to be joined if necessary.
2. Apply a small amount of flux to the area of soldering.
3. Heat using the flame of the butane torch and place the two items together.
4. Apply the solder to the heated brass while maintaining the heat until suddenly it runs.
5. Quickly remove the heat.
The tub will last you a long time because so little is used for each soldering job.
Solder Specification
Leaded rosin flux solder in a handy tube, small enough to fit in a pocket, the solder can be pulled through a hole in the top of the tube
- High activity rosin flux
- Low melting point for rework and repair
- Length: 2.5m
- Solder Alloy: 60, 40 Sn, Pb
- External Diameter - Metric: 1.2mm
- Melting Temperature: 190°C
- Weight - Metric: 17g
LEADED SOLDER IS FOR PROFESSIONAL USE ONLY
