This
offer is for a single light switch decorative gold finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate, the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
Power Extension Cable IEC C14 Male Plug to UK Mains Female Socket 13A
Black 0.5m
Product information
IEC C14 connector to 13A, 1-gang mains extension socket with a 0.5m
Lead
1.00mm², H05VV-F cable
Conforms to EN60320
This
offer is for a double light switch decorative silver finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These trims are approx. 175mm x 115mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate, the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
Choice of Orange, Black or White Heavy Duty 2 Gang
Trailing Rubberised Socket 13A High Impact Extension
Product Information
Heavy Duty 2 Gang Rubberised Socket.
The Top Section is Manufactured from High Impact Rubberised Plastic, rated at 13A and conforms to BS1363/A.
2x Orange Heavy Duty 2 Gang Trailing Rubber Socket
13A High Impact Extension
Product Information
2 Quantity of Heavy Duty Orange 2 Gang Rubberised
Sockets.
The Top Section is Manufactured from High Impact Rubberised Plastic, rated at 13A and conforms to BS1363/A.
This
offer is for 2 light switch decorative Clear finish surrounds designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate, the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
50
Pk Philips Head HIGH QUALITY M3.5 Electrical Machine Screw Switch Plug Socket
Product information
Designed to replace screws
used in standard electrical sockets, blanking plates, switches and pattresses
etc.
Nickel
coated steel screws with Phillips head and M3.5 thread
Screwdriver in picture not included
Choice of Orange, Black or White Heavy Duty 1 Gang
Trailing Rubberised Socket 13A High Impact Extension
Product Information
Heavy Duty 1 Gang Rubberised Socket.
The Top Section is Manufactured from High Impact
Rubberised Plastic, rated at 13A and conforms to BS1363/A.
A Magnetic Tool Holder which offers a simple storage solution to keep metal tools,
utilising the wall or cupboard as storage space.
410mm in Length
Colour - White
Supplied with screws
2m Switched Extension Lead, Surge Protected with a choice of 4, 5 or 6 Sockets with 2 USB Ports
2m Switched Mains Extension with 2x USB Charging Ports
Individually Switched Sockets with Neon Power Indicators
Surge Protected
Rated at 13A
USB Ports Rated at 5V, 2.4A
Hanging Holes on the Base of the Unit
Conforms to BS1363/A, BS5733/A
This
offer is for a double light switch decorative Rose Gold finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 175mm x 115mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate, the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
·
This offer is for a single light switch decorative White
finish surround designed to protect wall coverings from finger marks.
Unlike many other plates the centre part is recessed so that your socket sits
nicely with a lower profile.
·
These square trims are approx. 145mm x 145mm and will give
any room a nice decorative feature and protect from finger marks
close to the switch and are easy to wipe clean.
·
These covers are easily fitted by removing the two screws and
fitting diagonally over the switch plate. The centre hole is big enough to
manoeuvre over the switch without the need to un-wire it, though we recommend
the installation is carried out by a competent electrician and to isolate mains
electricity, once in place the screws need to be tightened whilst ensuring the
plate is sitting square.
We
also have a range of these trims in our store for single and double sockets
in other colours.
2x White Heavy Duty 2 Gang Trailing Rubber Socket
13A High Impact Extension
Product Information
2 Quantity of Heavy Duty White 2 Gang Rubberised
Sockets.
The Top Section is Manufactured from High Impact Rubberised Plastic, rated at 13A and conforms to BS1363/A.
2x Black Heavy Duty 2 Gang Trailing Rubber Socket
13A High Impact Extension
Product Information
2 Quantity of Heavy Duty Black 2 Gang Rubberised
Sockets.
The Top Section is Manufactured from High Impact Rubberised Plastic, rated at 13A and conforms to BS1363/A.
This
offer is for 2 light switch decorative grey finish surrounds designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
This
offer is for 2 light switch decorative black finish surrounds designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
4 Gang Extension Socket Multi Plug (No
cable) 4 Way 13a Mains Power Adaptor
Product Information
Convert 1
UK Mains to 4
Max load:
13A - 250V
Conforms
to BS1363/A
Dimensions
(HxWxD): Approximately 110x250x25mm
