This
offer is for a single light switch decorative silver finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate. The centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
5 Pack Flux Brush Brushes Ideal for Soldering
Flux, Glue, Metal Handle
Designed to
apply flux when making soldering joints, also suitable for general workshop
use. Metal handles with crimped bristles reduce damage from corrosive
substances.
Crimped bristles
Metal handles
For applying flux when making
soldering joints
Ideal for general workshop use
Bristle length 25mm
This
offer is for a single light switch decorative grey finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate, the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
Straight mending plates for fixing, repairing, strengthening etc.
Colour could be different
Length: 100mm.
Screw hole diameter: 4mm.
Dimensions are approximate.
This
offer is for 2 light switch decorative grey finish surrounds designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
This offer is for 4 light switch decorative Clear finish surrounds designed to protect wall coverings from finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These square trims are approx. 145mm x 145mm and will give any room a nice decorative feature and protect from finger marks close to the switch and are easy to wipe clean.
These covers are easily fitted by removing the two screws and fitting diagonally over the switch plate. The centre hole is big enough to manoeuvre over the switch without the need to un-wire it, though we recommend the installation is carried out by a competent electrician and to isolate mains electricity, once in place the screws need to be tightened whilst ensuring the plate is sitting square.
We also have a range of these trims in our store for single and double sockets in other colours.
Rust resistant black finish
Rubber end caps
Ideal for hanging tools, ladders, cords and power equipment.
Max load: 30kg
Approx 19.5cm high and 13cm depth with inside bracket space approx 9.4cm.
A pair of red and black test leads with shrouded 4mm plugs on both ends.
Flexible leads
Current rating: 10A
Lead length: 1.2m
CAT III 1000V, CAT IV 600V
360° Adjustable PCB holder
Ideal for clamping PCBs to aid soldering
Adjustable base and clamp to hold various sizes of PC Boards
Light weight
Max holding Size: 200x140mm
Three way lead connector, designed to provide a simple method of extending mains connected tools and other appliances.
For use with earthed appliances
They are manufactured from high impact rubber
Rated at 10A and conforms to BS5733/A.
Mains Socket Tester 240v 3 Pin
Plug in House Electrical Wiring Tester Plug UK
Product information
You are buying a Mains UK Socket Tester.
Easily test sockets and trailing mains sockets to ensure they are wired with
the correct polarity.
This is a simple but effective plug , ideal to keep in your toolbox.
Test new and existing wiring in one safe and simple operation.
Test live neutral and earth circuits
This plug checks for
Correct wiring, No earth, Neutral
fault, Live / earth reverse, Live / neutral reverse.
Instruction:
• There is no requirement of setting the plug tester. Check the function of the
tester by inserting into a proper socket outlet
with all three indicator lamps light up. The tester is ready for testing.
• Make sure the mains is turned on.
• Insert the plug tester into the socket outlet that requires testing.
• If all the three indicator lamps light up, the socket is wired correctly.
• If other situation happens, please refer to the chart on the plug tester.
Consult a qualified electrician to rectify the situation.
• Unplug after use.
This
offer is for a single light switch decorative gold finish surround designed to protect wall coverings from
finger marks. Unlike many other plates the centre part is recessed so that your socket sits nicely with a lower profile.
These
square trims are approx. 145mm x 145mm and will give any
room a nice decorative feature and protect from finger
marks close to the switch and are easy to wipe clean.
These
covers are easily fitted by removing the two screws and fitting
diagonally over the switch plate, the centre hole is big enough
to manoeuvre over the switch without the need to un-wire it, though
we recommend the installation is carried out by a competent
electrician and to isolate mains electricity, once in place the screws need to be tightened whilst
ensuring the plate is sitting square.
We
also have a range of these trims in our store for single and double sockets in other colours.
2 x 400ml IPA Solvent Alcohol Cleaner Electrical Components PCB Aerosol
SprayProduct information
Highly effective isopropyl alcohol (IPA) cleaning
solvent for electrical and electronic components.
·
Evaporates after application and leaves no residue
·
Non-corrosive to metals, safe on plastics and fibres
·
Flammable
Applications
IPA is a universally recognised electronic cleaning solvent which
is suitable for use on a wide variety of electronic equipment and components
including tape heads, disc drives, PCB's, optical equipment, lenses, mirrors
and precision instruments.
It evaporates after application and does not leave any
residue.
It is considered to be safe on metals and most plastics, if
unsure of plastic compatibility, always test on an inconspicuous area before
general use.
Note
It is flammable not for use on live electrical equipment. Allow
solvent to fully evaporate before operating the equipment.
Please read label for more information.
10A
Block Plug In Terminal Strips 12 Way Connector Blocks Male and Female
10 Amp
Product
Information
Pluggable
terminal strips - both Male and Female included
12
Way
10mm
Pitch
Brass
contacts
Cut
to required size
Single
To Double Adaptor Wall Socket Converter 1 Gang 2 Gang Way Slim
Pattress
Product
Information
Simple, quick installation
Manufactured to BS5733
Depth from wall of 28mm
2 x rewireable straight IEC main connector, featuring screw terminations and reversible strain relief mechanism for circular and flat cable.
Can be used for office and computer equipment or where power is taken from a single point
Conforms to BS EN 60320
Max. cable diameter: 6.5mm
Current Rating: 10A
Voltage Rating: 250V
