60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 1.2mm 100g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 1.2mm
Melting
Temperature: 190°C
Weight
- Metric: 100g
60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 0.7mm 50g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 0.7mm
Melting
Temperature: 190°C
Weight
- Metric: 50g
60/40
Tin Lead Rosin Core Solder Wire for Electrical Solderding 1.2mm 50g
Product
Information
High
activity rosin flux
Low
melting point for rework and repair
Contains
Lead, for professional use only.
Flux
Type: Rosin
Solder
Alloy: 60, 40 Sn, Pb
External
Diameter - Metric: 1.2mm
Melting
Temperature: 190°C
Weight
- Metric: 50g
SOLDERING SET
FOR YOUR MAMOD STEAM ENGINE
REPAIR OR RENOVATION
Product Information
You will receive one tube of 60/40 wound solder wire which is
1.20mm thickness.
A 10g tub of quality flux, also known as soldering
paste.
This has a wax-like consistency and is
easy to apply.
Not everyone will have
soldering experience and if that is you, please read the five steps below.
1. Clean the surfaces to be joined if necessary.
2. Apply a small amount of flux to the area of
soldering.
3. Heat using the flame of the butane torch and
place the two items together.
4. Apply the solder to the heated brass while
maintaining the heat until suddenly it runs.
5. Quickly remove the heat.
Practice makes perfect!
The tub will last you a long
time because so little is used for each soldering job.
Solder specification –
Leaded rosin flux solder in a handy tube, small
enough to fit in a pocket, the solder can be pulled through a hole in the top
of the tube
High activity rosin flux
Low melting point for rework and repair
Length: 2.5m
Solder Alloy: 60, 40 Sn, Pb
External Diameter - Metric: 1.2mm
Melting Temperature: 190°C
Weight - Metric: 17g
LEADED SOLDER IS FOR PROFESSIONAL USE ONLY
60/40
Solder Wire Tube Tin Lead with Dispenser Electrical Soldering 17g
Product
Information
2 Qty 60/40 Solder Wire with Dispenser
Contains
Lead, for professional use only.
60 Tin / 40 Lead
External
Diameter - Metric: 0.9mm
Weight
- Metric: 17g x2
